|
|
elastic waterproof coating based on cement and polymer concrete and stone.
DESCRIPTION
GIDROFLEKS - Two composition based on cement, mineral fillers, additives (component) and polymer dispersions (Component A). After causing the surface, GIDROFLEKS forms a flexible waterproof layer, monolithic associated with the ground.
APPLICATIONS
* As Waterproofing coatings for concrete and stone.
* for the interior waterproofing water tanks, swimming pools, basements, tunnels, bathrooms, bathrooms, etc.
* for external waterproofing foundations, dams, protective walls, subways, etc.
* for waterproofing dynamic stitches (according to flow chart).
PROPERTIES
o Sposobno shut cracks.
o Coverage stable atmospheric pollution, corrosive effects of salt water, hardy.
o almost completely prevents carbonization of concrete, significantly slows the penetration of chlorides and other salts betonorazrushayuschih.
o steadily in the positive and negative hydrostatic pressure of water, using for waterproofing underground facilities.
o has high adhesion to the base of mineral binding.
o not toxic. It does not contain chlorides.
o reduces costs for the care and maintenance surface.
o not require special skills in using.
o Contains mikrofibru.
COLOR
In the standard option coverage GIDROFLEKS is gray, but can be produced in the colored designs on the supplementary agreement with the Customer.
Surface preparation
surface, which will bear the coverage GIDROFLEKS , should be firm and clean, without a trace of paint fall off fragments, fat, dust, plaster patches, etc. Destructive and corroded concrete should be removed. All cracks Caverns, emptiness and structural metal elements needed zadelat convoys type GIDROREM or GIDROPLAG .
Just before the injury, the surface should be washed with water to wet and completely remove dust and particles otsloivshihsya, leaving no luzh.
Mixing
GIDROFLEKS comes in the form of two pre-packaged components. Dry mixture, component B, should be added in a receptacle containing the component A, with constant mixing until a homogeneous mixture. We recommend mixing using mixer at low speed. May not be churning composition. Generating a mixture need to settle for 3-5 minutes, then mix. If necessary, for ease of application, in ready-mix you can add a small amount of water.
NANESENIE
for causing GIDROFLEKSA applies fiber brush or spatula. The first layer is recommended to cause brush to evenly cover the surface.
You can not inflict GIDROFLEKS :
o at ambient temperatures or treated surface below +5 ° C or above +30 ° C, as well as in anticipation of such temperatures next 24 hours.
o on the outer surface, where rain is expected within 6 hours of the coating.
Normally, causing two layers GIDROFLEKSA with a total expenditure of approximately 2-2,5 kg / m 2 . We recommend reinforcement cover steklotkanevoy grid, which vtaplivaetsya in the first layer after its application, and then covering the second layer.
Tools should wash with water immediately after work.
SHVATYVANIE
Coverage GIDROFLEKS ready for constant contact with water after 7 days after application.
After internal damp indoor time on the surface appearance of condensation can occur.
When dry or windy weather, as well as in the sun, cover GIDROFLEKS are encouraged to moisten with water or harbor, within days.
OPERATION
Coverage GIDROFLEKS to be protected from mechanical effects. Coverage has limited throughput.
PREDOSTEREZHENIYA
Like all cement materials, GIDROFLEKS is alkaline (in solution) and abrasive. When it is necessary to use rubber gloves. If your mixture into the eyes, wash them thoroughly with clean water, if irritation does not go away, to see a doctor.
PACKAGING
Packaged in 3.5 and 35 kg.
STORAGE
6 months in their original packaging, in a warm and dry place.
CERTIFICATION
TU 5745-002-70405514-2004
Hygiene Certificate number 77.01.03.574.P.07413.04.4 from 06.04.2004 city  Find "GIDROFLEKS" in the directory of organizations
|
|
