|
Elastic thick 2-component composition for sealing seams on the basis of polisulfidnoy
Joint Sealant FS-V - an elastic, thick 2-component sealant for sealing joints in polisulfidnoy basis. Once completely dry the material becomes elastic, rezinopodobnym sealant with a high carrying capacity. The product is resistant to water (sea water), salt solutions, petrol, mineral fats. No rotting, has good ability of the retractors.
Technical Data
| mixing (proportional to weight) |
100:13 (A: A) |
| Term fitness after mixing |
approx. 2 hours (+20 o C) |
| Drying time |
approx. 24 hours (+23 o C) |
| Consistency |
paste, thick |
| Specific gravity |
approx. 1,6 kg / l |
| And Weight |
approx. 35 kg |
| Elasticity |
> 80% |
| general permit deformation |
15% |
| temp |
from +5 o C to +40 o C |
| Color |
black
Scope
Joint Sealant FS-V is used for sealing joints in terms of building structures. Suitable for cracks in the foundation, facilities for wastewater treatment, garages, tunellyah, tanks and etc.
Surface preparation
surfaces of the parties before drawing Joint Sealant FS-V must be clean, peeled lubricants and dust. Soaking the surface of double-obgruntovat KӦSTER FS Primer, does not absorb enough progruntovat once KӦSTER FS Primer.
Application
Good mix both components mixer at slow speed until a mass of homogeneous consistency (at least 3 min.). After about 2 hours after the primer composition to cause the spatula or a suitable tool to the syringe (automatic pistol).
|
 Find "Joint Sealant FS-V" in the directory of organizations
|
|
