dry mixture at Portland, quartz sand additives to reduce the capillary porosity and improve water solution.

Scope

Shtukaturnaya waterproofing applied whenever necessary to protect from moisture brick, concrete and reinforced concrete structures, including hydro pools.

Advantages material

• single composition.
• used on both concrete and brick base.
• Easy to use - requires no special equipment.

  Instructions for use

  Surface preparation

  base should be strong, purified from dust, dirt and other substances that weaken the adhesion solution to the surface.

  Preparation of solutions

  Shtukaturnaya waterproofing is mixed with clean water in a ratio of 180 grams of water per kilogram of dry mixture. To use the mixing drill with the nozzle. The solution must withstand 10 minutes, then mix to dissolve additives.

  Surface

  thickness shtukaturnoy waterproofing 15-25 mm. It is desirable to stow the mixture in 2 admission, with the thickness of each layer about 10 mm. After laying the first layer before applying a second layer must pass at least 8 hours. When packing damp on the surface, much vpityvayuschuyu water should be used primers. As primers can be used butadienstirolny latex, diluted with water at a ratio of 1:1, or a solution prepared from dry mixes obmazochnoy waterproofing (in particularly difficult cases, when highly absorbing surface).

  Specifications Lahti SHTUKATURNOY

  characteristics of the material	Value
  crushing stress	for 1 hour curing in air 8-12 MPa
  Mobility mixture	Pk = 2
  Compression strength	35 MPa
  bending strength	8 MPa
  Adhesion	1,2 MPa
  Vodouderzhivayuschaya ability	98%
  The cost of 1 mm thickness	1,5 kg / m 2
  to make waterproof	W 12

Find "Lahti plastering waterproofing" in the directory of organizations