Often, ceramic floor tiles fall not on cement slurry or dry glue and asphalt mastic. The specialists argue that the mastic to lay tiles (eg, "Mastic for bonding kafelnyh tiles", "PS-5", "Gumilaks " "Sintalaks " "Akrilaks " "Germelaks ") And glues (" Bustilat "" Style ", etc.) securely held pottery on the floor. It would therefore be no more than describe the composition of the adhesive and how to work with them.

The composition of bituminous mastics stickers for ceramic tiles:
1. Bitumen-silicate. (Glinobitumnaya paste - 1 part liquid glass - 3 / 4, chalk - 2.) Glinobitumnaya paste prepared from bitumen brand BN-II or BN-III - 36%, clay fat - 24% water - 40%.

2. Cold lime-bitumen. (Asphalt brand BN 2 / 11 - 1 part lime dough - 0.8 parts water - 0.6 parts.) Prepared with the heated asphalt to 160-180 ° C, lime and water tests - to 60 - 80 ° S. A mixture of mixed within 5-10 minutes.

PVC caused by progruntovannye surface or a thin layer of concrete floors - no more than 2-3 mm. Tiles fit to polish, postukivaya on their surface to better attachment in a way that the seams between plitkami were minimal (less than 2 mm). Vydavlennye plitkami surplus putty remove a steel spatula, and the remnants of mastic smyvayut solvent. The order nastilki tiles on the bitumen sealant is the same as when nastilke tiles on cement slurry.

However, before laying floor tiles must be purely vymesti and equalize. If the wooden floor, it aligns putty for wood, concrete floors aligned grout. This solution is prepared, a little gravy water to dry cement, mixing constantly, until thick paste is formed. In some cases, when the floor is very porous, it must be zagruntovat. The composition of primers depends on how the glue or mastic you're going to enjoy when nastilke tiles. For example, if you apply for nastilki glue "Bustilat", the sex advance should progruntovat 15% by the strength of the glue in the water. Then, on dry zagruntovannuyu surface layer of glue and cause it to fall tiles, carefully holder zagruntovannoy it to the floor. Walking on the floor in this case can only be through the night.

PVC "Sintalaks " "Gumilaks " "Germelaks" and "Akrilaks" pre-well is intermingled, causing spatula to dry thoroughly swept the floor (concrete floors, wooden) layer 1,5-2 mm, and then immediately begin nastilku ceramic tiles. Walking on the floor is available for three days. With the help of putty "PS-B " You can not just stick tiles, and linoleum all kinds. Prepare it for no more than a half hour before using. To prepare sealant mixed with otverditelem ratio of 10:1, and then inflict on the floor spatula and strengthen its ceramic tiles, slightly nadavlivaya them. Walking on the floor can be no earlier than two days. "Mastic for bonding kafelnyh tiles" perfectly kleit all facing materials for the floor, including tiles, but it was not enough water resistant. To increase the water resistance of, in front of him causing impose kremniyorganicheskoe connection.

Depletion of all the glues and mastics on the surface 1 m2 floor ranges from 0.5 to 0.9 kg. Clean tools and hands to remove excess glue, yet it has not yet zasoh, you can water when using "Bustilatom " "Mastikoy for bonding kafelnyh tiles", sealant, "Sintalaks " "Gumilaks " " Germelaks "" Akrilaks ". If you use mastic "PS-B" excess putty on the old is removed acetone, alcohol or kerosene. They also laundered their hands and tools.

Find "Mastic for floor tiles" in the directory of organizations


Related goods or services

Feed

Feed

Wood Protector Impregnat for garden and build wood

Wood Protector Impregnat for garden and build wood

KD-System

KD-System

UZIN RE-460

UZIN RE-460

Floor slab and trays of heat

Floor slab and trays of heat

Wood Protector

Wood Protector

Lighting

Lighting

Tiles Cotto

Tiles Cotto

Car locks

Car locks


© 2006-2019 ЧП "Современные Технологические Системы"