GIDROSIL

 Waterproof coating based on cement for the concrete and stone
DESCRIPTION

GIDROSIL is a mixture of cement, fillers and additives. After causing the surface, GIDROSIL form a watertight, but paropronitsaemy layer, monolithic associated with the ground.
APPLICATIONS

    * As Waterproofing coatings for concrete and stone for interior and exterior, surface and underground work.
    * for waterproofing of buildings and structures under the follow-up finishes, as well as finish coating.
      PROPERTIES
          o Due to the high adhesive properties and full compatibility with stone and concrete surfaces, GIDROSIL form a single monolithic structure with the ground.
          o opposes both positive and negative pressure of the water.
          o watertight but paropronitsaem.
          o lifetimes comparable to the life of concrete structures.
          o GIDROSIL simply and quickly sprayed, equipment easily laundered water.
          o Coverage GIDROSIL can be painted or coated with ceramic tiles.
          o To improve the performance properties of the GIDROSIL can be added mikrofibra.
            COLOR

            In the standard option coverage GIDROSIL is gray, but can be produced in the colored designs on the supplementary agreement with the Customer.
            Surface preparation

            surface, which will bear the coating should be firm and clean, without a trace of paint fall off fragments, fat, dust, plaster patches, etc. All cracks Caverns, emptiness and structural metal elements needed zadelat convoys type GIDROREM or GIDROPLAG . Just before the injury, the surface should be washed with water to wet and completely remove dust and particles otsloivshihsya.
            Mixing

            GIDROSIL shuts drinking water or a mixture of water and a special fluid. We recommend mixing using mixer at low speed, until a homogeneous consistency. May not be churning composition. After mixing the composition should stand for 3-5 minutes and mix again. In the cooked mixture can not add water.
            NANESENIE

            GIDROSIL is caused by brush, spatula or special raspylitelem.
            You can not inflict GIDROSIL :
          o at ambient temperatures or treated surface below +5 ° C or with the anticipation of lower temperatures below +5 ° C next 24 hours.
          o on the outer surface, where rain is expected within 6 hours of the coating.


            GIDROSIL to cause a 2 - 3 layer. The optimum flow for the first layer - 1.5 kg at 1 m 2 , for subsequent layers - 1 kg per 1 m 2 . Layers should be cause in mutually perpendicular directions. The last layer can give finishing with a spatula or even repair a damp sponge.
            Equipment and tools should wash with water immediately after work.
            SHVATYVANIE

            Coverage GIDROSIL ready for constant contact with water for 7 days and a final gathering strength after 28 days. After internal damp indoor time on the surface appearance of condensation can occur.
            When dry or windy weather, as well as in the sun, cover GIDROSIL are encouraged to moisten with water or harbor, within 2-3 days.
            OPERATION

            top cover GIDROSIL are encouraged to use materials that are comparable to the parameter air.
            When applying GIDROSILA for waterproofing swimming pools, reservoirs for drinking water and the like e. ready coating must be repeatedly washed with water or salt solution, to achieve the required pH.
            PREDOSTEREZHENIYA

            Like all cement materials, GIDROSIL is alkaline (in solution) and abrasive. When it is necessary to use rubber gloves. If your mixture into the eyes, wash them thoroughly with clean water, if irritation does not go away, to see a doctor.
            PACKAGING

            bags of 25 kg.
            STORAGE

            6 months in their original packaging, in a warm and dry place.
            CERTIFICATION

            TU 5745-003-70405514-2004
            Hygiene Certificate number 77.01.03.574.P.17786.08.4 from 19.08.2004 city

Organization offering a goods or service



Package Standart

EKCO

Ukraine, Crimea
Simpferopol, Krylova st. 155, Factory of Sizakor

Package Standart

REGIONAL ROOFING CENTER, LTD.

Ukraine, Lugansk region
Lugansk, Lineva st. , 75

More detailed list of companies offering a product or service you can order

e-mail: sts1872@gmail.com

Find "GIDROSIL" in the directory of organizations


Related goods or services

The electromagnetic locks

The electromagnetic locks

Facade-wall slicing Noodles

Facade-wall slicing Noodles

Steklomagnezitovy list

Steklomagnezitovy list

Sills

Sills

Lahti overhaul of the core

Lahti overhaul of the core

Tiles Klinker

Tiles Klinker

Penebar

Natural tiles

Natural tiles

Pebbles Onik

Pebbles Onik


© 2006-2021 ЧП "Современные Технологические Системы"